Bobcat HB580 Tool Chisel for Hydraulic Breaker Hammer
HUILIAN replacement tool chisel for Bobcat HB580. HB580 combines a 44 mm rear-shank diameter with a 63 mm collar reference and a 35 mm reduced section. Its 75 mm profile span and 37 mm rear reference require comparison alongside these diameters rather than being used alone. Confirm the old-tool profile, selected tip and overall length for a quotation.
Bobcat HB580 Tool Chisel for Hydraulic Breaker Hammer
HUILIAN supplies replacement tool chisel enquiries for Bobcat HB580. HB580 combines a 44 mm rear-shank diameter with a 63 mm collar reference and a 35 mm reduced section. Its 75 mm profile span and 37 mm rear reference require comparison alongside these diameters rather than being used alone.
HB580 44 mm Rear Shank with a 63 mm Collar Reference
- The 44 / 63 mm rear-shank-to-collar combination preserves the physical distinction from the smaller HB380 profile.
- The 35 mm reduced-section check separates the HB580 retaining area from HB380 even though both drawings use a 75 mm span and 37 mm rear reference.
- The rear profile can be checked independently from the working tip and length, allowing the quotation to identify the intended retaining arrangement and selected job specification.
Product Specifications and Identification
| Specification | Details |
|---|---|
| Supplier brand | HUILIAN |
| Intended breaker model | Bobcat HB580; confirm exact model plate, serial number and installed configuration |
| Part name | Hydraulic breaker tool chisel / replacement working tool |
| Rear-shank diameter | 44 mm (drawing reference) |
| Rear-end diameter | 44 mm (drawing reference) |
| Collar diameter | 63 mm (drawing reference; separate from rear-shank diameter) |
| Retaining and rear references | 44 mm rear-shank diameter; 44 mm rear-end diameter; 63 mm collar diameter; 75 mm axial retaining-profile span; 37 mm rear reference; 35 mm reduced-section callout. Values are drawing references; confirm tolerances and configuration separately. |
| Illustrated retaining outline | Single-sided recess with a larger forward collar; compare the collar and rear shank separately. |
| Working tip and overall length | Confirm separately; the supplied rear-shank drawing does not specify the complete working-end shape or overall length. |
| Ordering information | Provide the old part reference where available, photos, quantity and destination. The quotation confirms price, availability, lead time, final specification and supplied components. |

Bobcat HB580 Spare Parts and Part Numbers
| Component | Identification for Quotation |
|---|---|
| Tool chisel for HB580 | Check the 44 mm rear shank, 63 mm collar, 75 mm retaining span and 37 mm rear reference alongside the old part number and photos. |
| Related HB580 components | Identify tool retainer, upper and lower bushings, dust seal and piston separately. Part numbers are not established by the chisel drawing. |
Fitment and Ordering Checklist for HB580
For HB580, include all three section references: 44 mm rear shank, 63 mm collar and 35 mm reduced section. Confirm the shared 75 / 37 mm axial values against the old part as well.
- Send the Bobcat HB580 model plate, serial number and old-tool photographs, including the rear step and retaining region.
- Measure the 44 mm rear shank, 44 mm rear end, 75 mm profile span, 37 mm rear reference and 35 mm reduced-section reference shown in the drawing.
- Confirm tool-guide and retainer configuration, working tip, required overall length, tip orientation and dimensional tolerances.
- Specify quantity and destination for a quotation confirming the selected tool and any separately ordered maintenance components.
Related Bobcat HB580 Spare Parts
An Bobcat HB580 tool replacement enquiry can include tool retainer, bushings, dust seal and piston. Inspect retaining components and bushings against the breaker service requirements and identify each requested part separately. The chisel and related components are supplied as specified in the quotation.
Other Hydraulic Breaker Hammer Spare Parts of Our Factory
Bobcat Hydraulic Breaker Model:
B290 B300 B400 B500 B600 B700 B850 B950 B1200 B1400 HB280 HB380 HB580 HB680 HB880 HB980 HB1180 HB1380 HB2380
Our factory can manufacture hydraulic breaker spare parts. The Bobcat model range above is supplied for parts enquiries; the required component must be matched to its own breaker configuration. Send the relevant drawing or part number, quantity and material requirements so the manufacturing specification and quotation can be confirmed.
| Part Type | Part Type | Part Type | Part Type |
|---|---|---|---|
| Back Head | Front Head | Breaker Cylinder | Through Bolt/Tie Rod |
| Seal Kit | Diaphragm/Membrane | Rod Pin | Stop Pin |
| Upper Bushing/Inner Bush/Chisel Bush | Accumulator | Sleeve Valve | Piston Ring |
| Chisel/Tool | Thrust Ring | Moil Chisel | Piston |
| V-Wedge Chisel | Universal Chisel | Flat Chisel | Damper/Shock Absorber |
| H-Wedge Chisel | Lower Bushing/Outer Bush/Front Cover | Rubber Pad | Side Bolt |
| Charging Valve | N2 Gas Charging Kit | Gas Bottle | Lock Pin |

Frequently Asked Questions
Which dimensions identify the Bobcat HB580 tool chisel?
44 mm rear-shank diameter; 44 mm rear-end diameter; 63 mm collar diameter; 75 mm axial retaining-profile span; 37 mm rear reference; 35 mm reduced-section callout. Values are drawing references; confirm tolerances and configuration separately. For HB580, include all three section references: 44 mm rear shank, 63 mm collar and 35 mm reduced section. Confirm the shared 75 / 37 mm axial values against the old part as well.
What is distinctive about the HB580 tool profile?
The 44 / 63 mm rear-shank-to-collar combination preserves the physical distinction from the smaller HB380 profile. The 35 mm reduced-section check separates the HB580 retaining area from HB380 even though both drawings use a 75 mm span and 37 mm rear reference.
Which working tip and overall length should I order for HB580?
The supplied HB580 drawing shows the rear shank and retaining region, not a complete working tip or overall tool length. Specify the job, preferred moil, wedge or blunt tip, required length and orientation so the quotation can confirm the selected tool.
Can the HB580 chisel enquiry include other maintenance parts?
Enquire separately about the Bobcat HB580 tool retainer, upper and lower bushings, dust seal and piston. Supply a part reference or photos and quantity for each component. The quotation confirms the items and packing list supplied.
Request a Quote
Send your Bobcat HB580 chisel enquiry with the 44 / 44 mm rear shank-to-rear diameter checks, retaining-profile measurements, old part number where available, photos, selected tip, overall length, quantity and destination. HUILIAN will confirm the replacement specification and quotation.
About Shipping
We usually ship goods by DHL Collected, DHL, UPS, TNT, Fedex, EMS, and SF Express.
The delivery time is as follows:
DHL 3-5 days, UPS 5-7 days, TNT 5-10 days, Fedex 4-6 days, and DHL Collected 1-3 days to arrange.
By air, 7~10 days; by sea, 15~48 days.
For any questions, please feel free to contact us. Our contact information is as follows:
You can call our customer service hotline and our team will provide you with immediate assistance.
If you have more detailed questions or need to send a document, you can contact us by email at service@hlmachinery.com. We will reply to your email within 24 hours.
Online Services
Online Voice and Video Support for Excavator Parts
We offer advanced online voice and video support to assist you with all your parts-related needs. Whether you're troubleshooting an issue, installing a component, or need help selecting the right parts for your machine, our experienced technicians are just a call or video chat away.
Through our secure online platform, you can connect with our experts in real-time, receiving clear, step-by-step guidance and visual demonstrations. This service ensures that you can resolve any technical challenges quickly and efficiently, without the need for an on-site visit. With voice and video support, you’ll receive the personalized attention and hands-on assistance you need, no matter where you are.
Enjoy faster resolutions, improved productivity, and the confidence that our team is always here to support you with the latest technology and expert knowledge.
For any questions, please feel free to contact us. Our contact information is as follows:
+86 188 1917 0788 +86 133 9263 9545 +86 139 2410 9994
You can call our customer service hotline, and our team will provide you with immediate assistance.
If you have more detailed questions or need to send a document, you can contact us by email at service@hlmachinery.com. We will reply to your email within 24 hours.
Extended Warranty Coverage
All of our excavator parts come with an industry-leading warranty to ensure peace of mind. If any part fails due to manufacturing defects within the warranty period, we will replace it at no additional cost to you.
24/7 Customer Support
Our dedicated customer service team is available around the clock to assist you with any issues or questions about your excavator parts. Whether it's a technical issue or a simple query, we're here to help—anytime, anywhere.
Fast Delivery & Replacement
We understand that time is money. That's why we guarantee fast delivery of replacement parts, with priority shipping options to ensure your excavator is back in action as quickly as possible.
Technical Support & Training
We don’t just sell parts—we provide ongoing technical support. Our experts are available for virtual consultations, including video calls, to guide you through installations, maintenance, and repairs, ensuring your equipment stays in top condition.
For any questions, please feel free to contact us. Our contact information is as follows:
+86 188 1917 0788 +86 133 9263 9545 +86 139 2410 9994
You can call our customer service hotline, and our team will provide you with immediate assistance.
If you have more detailed questions or need to send a document, you can contact us by email at service@hlmachinery.com. We will reply to your email within 24 hours.
Get a free quote
We attach great importance to the needs and feedback of every customer. If you have any questions about our products or any other services, please feel free to contact us. We will wholeheartedly provide you with professional support and help.
Bobcat B290 / B300 Tool Chisel for Hydraulic Breaker Hammer
Bobcat B400 Tool Chisel for Hydraulic Breaker Hammer
Bobcat B500 Tool Chisel for Hydraulic Breaker Hammer
Bobcat B600 / B700 Tool Chisel for Hydraulic Breaker Hammer
Bobcat B850 / B950 Tool Chisel for Hydraulic Breaker Hammer
Bobcat B1200 / B1400 Tool Chisel for Hydraulic Breaker Hammer
Bobcat HB280 Tool Chisel for Hydraulic Breaker Hammer
Bobcat HB380 Tool Chisel for Hydraulic Breaker Hammer
© 2025 HUILIAN MACHINE. All rights reserved
